Carbide Tool Works

REP. HINCHEY ANNOUNCES FINAL CONGRESSIONAL APPROVAL OF $2.8 MILLION FOR TSEC PARTNERS TO CONTINUE DEVELOPMENT OF SOLAR, LED TECHNOLOGY FOR DEFENSE DEPARTMENT
US Fed News Service, Including US State News; 12/22/2009; 1120 words; ...Hinchey said. "The work that Precision Flow Technologies...highly sophisticated tools needed by C9 and the...Defense to develop Silicon Carbide-type semiconductors...Department supports silicon carbide-based semiconductor...manufacturing low defect silicon carbide semiconductor grade ...

Research on manufacturing technology detailed by scientists at Northeastern University.
Journal of Technology; 12/1/2009; 925 words; ...performance. In this work, the entire slot micromilling...Al6061-T6 by one flute carbide cutter was simulated by...The variations of the tool chip contact length...the chip moments, ''tool rake moment'' M (Tool) and ''shear band moment...

Research from L.R. Silva and co-researchers provides new data on composite materials.
Journal of Mathematics; 12/1/2009; 575 words; "The cutting tool geometry plays a...irrespectively of the work material. For instance...result in changes in tool wear rate, cutting...performance of uncoated carbide tools with standard cutting geometry and tools with modified edge...reduced with the tool nose radius and the...

Studies in the area of manufacturing technology reported from D.G. Thakur and co-researchers.
Journal of Technology; 12/1/2009; 752 words; ...Inconel 718. In this work, an experimental investigation...with cemented tungsten carbide (K20) insert tool," wrote D.G. Thakur...result and analysis of this work indicated that the above...Technology, Tungsten Carbide This article was prepared...

Findings from L.R. Silva et al in composite materials reported.(Report)
Journal of Technology; 12/1/2009; 565 words; ...scientists in Belo Horizonte, Brazil report. "This work presents a preliminary experimental study based on Merchant...Distinct feed rate values were tested using uncoated carbide tool (grade K15) without chip breaker. The aim of this study...