Alloy Carbide Co.

Comparison of Mechanical Properties of TMW Alloys, New Generation of Cast-and-Wrought Superalloys for Disk Applications
Metallurgical and Materials Transactions; 12/1/2009; 2050 words; A new kind of Ni-Co-base disk alloys, named TMW alloys, has...Nibase disk alloy (U720Li alloy). The chemical compositions of the tested alloys are listed in Table I...condition reported for U720Li alloy (1100 °C/4 h followed...x3B3;' phase and carbide were observed. ...

Influence of Grain Boundary Character on Creep Void Formation in Alloy 617
Metallurgical and Materials Transactions; 12/1/2009; 5921 words; Alloy 617, a high-temperature creep...applications in the NGNP is INCONEL* alloy 617, UNS N06617. in which Co and Mo provide solid solution...strengthening, while M6C and M73C6 type carbides, where M is either Mo or Co, provide the hightemperature...

Research from L.R. Silva and co-researchers provides new data on composite materials.
Journal of Mathematics; 12/1/2009; 575 words; ...report. "This article compares the performance of uncoated carbide tools with standard cutting geometry and tools with modified...rate is elevated, presenting values comparable to metallic alloys. In addition to that, the polyamide without reinforcing presented...

Precipitate Redistribution during Creep of Alloy 617
Metallurgical and Materials Transactions; 12/1/2009; 8413 words; ...corrosion resistance. Alloy 617, a candidate for...However, during creep, carbides that are supposed to retard...the location of the carbides (e.g., intergranular...important factor in carbide distribution; some...to the migration of carbides to the boundaries and...Nuclear Plant may ...

Recent studies by Z.K. Chu and co-authors add new data to metallurgy findings.
Journal of Technology; 12/1/2009; 716 words; ...dislocation climbing. It is found that the fracture mode of DZ951 alloy changes from cleavagelike fracture at low temperature to ductile...increasing temperature, cracks can initiate at the surface, carbide/matrix interface, and cast pore. The growth of microcrack...